250
Media edit mode
Save
loaded in Pa800 (changing the Sound, Volume, Pan,
Tempo, Drum Mapping, Wrap Around…).
9. To make the Sound assignment to the Style tracks effective,
be sure the “Original Style Sounds” parameter is not
checked (see page 88).
10. Save the Style Performance again. Select the “Write Current
Style Performance” to write changes to the Style Perfor-
mance. Touch OK to confirm.
Save
In this page, you can save User data from the internal memory to
a mass storage device (like an hard disk or an USB pen drive).
You can save single files, banks, or all the User and Favorite Style
files of the internal memory (i.e., the SSD device).
Note: While in this page, only data allowed for saving are shown.
All other files are hidden.
Here are the various types of files contained in the internal
memory:
The file/folder
type…
…contains…
…and will create on
the target device…
All All the User data in
memory
A .SET folder
Style The USER 01-03 Styles
and the FAVORITE 01-10
Styles
A STYLE folder inside
a .SET folder
Sound The USER Sounds and
Drum Kits
A SOUNDS folder
inside a .SET folder
Pad The USER Pads A PAD folder inside
the .SET folder
Perform (Per-
formances)
The Performances A PERFORM folder
inside a .SET folder
SongBook The SongBook database A SONGBOOK folder
inside a .SET folder
PCM All the Multisamples
contained in the SSD,
and the Samples con-
tained in RAM
A PCM folder inside a
.SET folder
Global The Global. All parame-
ters marked with
through the various
chapters are saved in the
Global. Voice Processor
presets are saved too.
A GLOBAL folder
inside a .SET folder. A
.VOC file will be cre-
ated inside the GLO-
BAL folder, containing
Voice Processor pre-
sets
To Next Page
Loading...
