230
Global edit mode
Video Interface: Video Out
Video Interface: Video Out
If your Pa800 is fitted with a Video Interface Board (VIF4), use
this page to adjust its parameters.
System
Selects the video standard (PAL or NTSC).
Mode
Experiment with this parameter to see if your external monitor
produces better results with an interlaced or de-interlaced video
signal.
Character
Select the character size (Big or Small).
Colors
Selects a color set for the lyrics and background.
1…5 Color set.
External Display
Use this parameter to decide what to show in the monitor con-
nected to the Video Out port (optional, requires the VIF4 Video
Interface).
Text Only Default at startup. Only Lyrics and Chords (if
any) are shown in the external display.
Mirror The internal display of the Pa800 is duplicated
(“mirrored”) to the external display.
Touch Panel Calibration
From time to time (for example, after loading a new operating
system), calibrating your Color TouchView™ display may be
necessary to make pointing more precise. If so, use this page.
1. When in this page, first touch exactly inside the set of
arrows in the upper left corner of the display.
2. The arrows will subsequently move to the other corners of
the display. Touch exactly inside them.
3. Finally, touch Save to confirm the new calibration.
• In case you want to exit and cancel the calibration, press
EXIT before completing the procedure.
Hint: To quickly reach this page from any other page, press GLO-
BAL to enter the Global mode, then press it again and keep it
pressed, until this page appears.
Gbl
Gbl
Gbl
Gbl
To Next Page
Loading...
Need help?
General
