171
Song Play operating mode
Mixer/Tuning: EQ Gain
Reference
Mixer/Tuning: EQ Gain
In this page you can set the three-band equalization (EQ) for
each individual track.
Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice-versa.
Note: The EQ is different for Sequencer 1 and Sequencer 2.
Hint: Track EQ can be memorized in the general preferences for the
Song Play mode (they are named Song Play–Global Setup). This
will help adapting the Pa800's sound to personal taste for any
MIDIfile you will ever play. Need a lighter Bass track? Save the
right equalization, and the Bass will stay light with all the subse-
quent Songs.
Hi (High) Gain
This parameter lets you adjust the high frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
Mid (Middle) Gain
This parameter lets you adjust the middle frequencies equaliza-
tion on each individual track. This is a bell curve filter. Values are
shown in decibels (dB).
Low Gain
This parameter lets you adjust the low frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
Play/Mute icon
Track’s play/mute status. See “Keyboard track status” on
page 161 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: EQ Control
This page lets you reset or bypass track equalization, pro-
grammed in the previous page.
Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice-versa.
Track Reset buttons
Use these buttons to reset (i.e., “flatten”) equalization for the
corresponding track.
Sng
Sng
Sng
Sng
To Next Page
Loading...
Need help?
General
