226
Global edit mode
MIDI: Filters
Seq.1/2 Tr 01…16
Use these channels to send data generated by a
track with the same name on either or both
onboard sequencers at the same time.
Chord Use this channel to send notes recognized by the
Chord Recognition engine to the MIDI OUT.
This is useful, for example, to control an external
Harmonizer from the Pa800, using the Lower
track to play chords, even if the track is muted.
MIDI: Filters
Use this page to set up to 8 filters for the MIDI data received or
sent by the Pa800.
Midi In Filters
Selected MIDI IN filters.
Off No filter.
Pitch Bend Pitch Bend.
MonoTouch Mono (or Channel) After Touch.
PolyTouch Poly After Touch.
PrgChange Program Change.
SysExcl System Exclusive.
All CC All Control Change messages.
0…127 Control Change message #0…127. See “MIDI
Data” on page 319 for a list of available Control
Change messages.
Notes Note events.
Midi Out Filters
Selected MIDI OUT filters. See above for information on each
filter type.
Audio Setup: Sty/Kbd
This page lets you connect Style, Keyboard and Pad tracks to the
audio outputs.
Tracks
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
Left + Right The selected track is connected to the Left &
Right outs, in stereo. The track is also sent to the
Internal FX processors (A and B for the Style and
Pad tracks, C and D for the Keyboard tracks). You
can set the volume using the MASTER VOLUME
slider.
Out 1 + 2 The track is connected to the 1 & 2 sub-outs, in
stereo. It is not sent to the Internal FX processors.
The MASTER VOLUME slider has no effect on it.
Out 1 The selected track is connected to the sub-out 1.
It is mixed to mono. It is not sent to the Internal
FX processors. The MASTER VOLUME slider has
no effect on it.
Out 2 The selected track is connected to the sub-out 2.
It is mixed to mono. It is not sent to the Internal
FX processors. The MASTER VOLUME slider has
no effect on it.
Mid
Mid
Gbl
Track L/Mono & Right
Internal FX
Track 1 & 2