69
The SongBook
Selecting and using a Custom List
Quick Guide
Selecting and using a Custom List
After creating one or more Custom Lists, you can select one and use it for your show.
1 Touch the Custom List tab to select the Custom List page.
2 Use the List pop-up menu to select one of the available Custom Lists.
3 Select one of the entries in the list (it turns blue), then touch the Select but-
ton in the display (the selected entry turns green) to start playing back
from there.
Selecting a SongBook STS
Up to four STSs can be associated to any SongBook entry. It doesn’t matter if it is based on a Style, a
Standard MIDI File or an MP3 file.
1 Touch the Lyrics/STS tab to open the Lyrics/STS page and see the four
STSs associated to the current SongBook entry.
2 Select the desired STS by touching its name in the display. As an alterna-
tive, press the SINGLE TOUCH BUTTON corresponding to the desired STS.
The STS is selected. Keyboard tracks and Voice Processor settings may change.
Use the List pop-up menu to
select one of the available Cus-
tom Lists.
Touch Next to select the next entry in the
list. (This command can also be assigned to
an Assignable Switch).
Touch Select to set the
highlighted entry to play
(if different than the
one automatically
selected).
Entry in play. To select a
different one, highlight
it and touch the Select
button in the display.
STSs associated with
the current entry.
To Next Page
Loading...
Need help?
General
