29
Interface basics
Operative modes
Introduction
Drawbars
To change a drawbar’s position, select it, then use the TEMPO/
VALUE controls to change its position. As an alternative, touch a
drawbar with your fingers and keep in held. Then move it up or
down to change its position.
Icons
Various icons help identifying the type of a file, a Song, a folder.
Operative modes
Pa800 pages are divided into various operating modes. Each
mode is accessed by pressing the corresponding button in the
MODE section on the control panel.
Each operating mode is marked with a different color code, that
helps you understand at first sight where you are.
Three special modes (Global, Media, and SongBook) overlap the
current operating mode, that remains active in the background.
The SongBook mode can recall the Style Play or Song Play
modes.
Selected, highlighted items
Any operation carried on on parameters, data or list entries, is
executed on highlighted items. First select the parameter or item,
then execute the operation.
Non-available, grayed-out parameters
When a parameter or command is not currently available, it is
shown in grey on the display. This means it cannot be selected,
but may become available when a different option is selected, or
you switch to a different page.
Shortcuts
Some commands or pages can be recalled by keeping the SHIFT
button pressed, and touching other buttons or elements in the
display. See the “Shortcuts” chapter on page 331 for a list of
available shortcuts.
To Next Page
Loading...
Need help?
General
