Krone Big M II - Installing Auger-Type Cross Conveyor; Locking Clamping Levers

X - 24
Mowers
10.8.2 Installing the auger-type cross
conveyor
Install the retaining chains
 Attach the retaining chains (1) to the ring bolts (2) and
(3) of the auger-type cross conveyor.
Only use appropriate lifting devices to lift
the auger-type cross conveyor (weight of
the auger-type cross conveyor = approx.
300 kg).
 Slowly lower the auger-type cross conveyor (1) onto the
mower (2).
 At the end of the lowering process be sure to introduce
the auger-type cross conveyor into the guide pins (1)
and (2).
The surfaces (3) and (4) must be level with
each other at either side of the mower.
Locking the clamping levers
 Lock the clamping levers (1) and (2) located at the inner
side of mower (3).
Be sure the clamping levers (1) and (2) are
under tension when being locked.
Retighten as required.
4
1
BMS01210
3
2
BMS02280
4
3
2
1
BMS01270
1
3
2
BMS01140
1
2