X - 6
Mowers
Two conditioner speeds can be set on the main gearbox.
This influences the efficiency of the conditioner and power
consumption.
Normal operation: 700 r.p.m.
Maximum operation: 1000 r.p.m.
Only use the speed 700 r.p.m. during the running in
phase of approx. 25 h.
Remove the screw (2) on the shift lever (1).
Turn the shift lever 180°.
Secure the shift lever with the screw (2) again.
BM30025
1
2
To synchronise the gearwheels, loosen the screws (1),
open the flap (2) and turn the drive shaft with the tools
provided during the gear shift process.
SFM1-380
2 1
10.2.6 Setting the Conditioner Cover Plate
on the Front Mower
Two conditioner speeds can be set on the Schalt-
getriebe. This influences the efficiency of the conditioner
and power consumption.
Normal operation: 700 r.p.m.
Maximum operation: 1000 r.p.m.
EC-0-031
10.2.5 Setting the Conditioner Speed
Remove the wing screw (2) on the shift lever (1).
Turn the shift lever 180° (the mowing auger (3) must
be turned in such a way that the shift lever can be
fully turned).
Secure the shift lever with the wing screw (2) again.
The conditoner speed must only be set
with the engine turned off and the
ignition key removed.
To Next Page
Loading...
