Krone Big M II - Input Gearbox;Front Mower Maintenance; 2-Speed Gearbox;Front Mower Maintenance

X - 13
Mowers
EC-0-040
Oil change:  Intervals see section 10.3.5
 Unscrew the oil draining screw (2)
 Collect the used oil in a suitable
collection vessel.
 Fit oil draining screw(2)
 Fill oil through hole (3) (Oil level up to
hole (1))
Oil quality: see section 10.3.4
Oil capacity: see section 10.3.4
Oil inspection:  Intervals see section 10.3.5
 Remove check screw (1)
 Oil level up to bore hole
 If necessary, top up oil (SAE 90), fit
check screw
10.3.8 Input gearbox / Front mower
The used oil must be correctly disposed
of!
EC-0-041
Oil change:  Intervals see section 10.3.5
 Unscrew the oil draining screw (2)
 Collect the used oil in a suitable
collection vessel.
 Fit oil draining screw(2)
 Fill oil through hole (3) (Oil level up to
hole (1))
Oil quality: see section 10.3.4
Oil capacity: see section 10.3.4
Oil inspection:  Intervals see section 10.3.5
 Remove check screw (1)
 Oil level up to bore hole
 If necessary, top up oil (SAE 90)
10.3.9 2-Speed-gearbox / Front mower
The used oil must be correctly disposed
of!