IX- 3
Driving and Transport
9.8 Driving Forwards, Backwards
Always adapt the travelling speed of the
self-propelled high-performance mower-
conditioner according to the conditions on
road and on field.
I
II
III
IV
1
BMII-235
I
II
III
IV
BMII-236
1
Driving forwards from standstill:
After starting the engine the gear box is in neutral position.
Press activation button (1) at the rear side of the driving
lever.
Moving the driving lever forwards will cause the machine
to move forwards and accelerate.
If the lever is released it will return to its central position
automatically. The speed remains constant.
Moving the driving lever backwards will decelerate the
machine. It is decelerated until it comes to a standstill
by adherence.
9.7 Setting the Accelation
Behaviour
Using the switch (1) is possible even while driving to select
four different acceleration levels.
With constant operation of the driving lever into direction
and with constant engine speed the driving speed
increases the slowest in acceleration stage I and the
fastest in acceleration stage IV.
To Next Page
Loading...
Need help?
General
