III - 11
Controls
3.15 Air Conditioning/Heating
Rotary Switch
(1) On/off switch for air condition
(2) Heating control for setting the blow-out temperature of
the heater
(3) Free
(4) Fan control
To activate the air condition/heating the fan switch (4) must
be at least on fan stage 1. On fan stage 0 the air condition-
ing/heating is without function.
Starting the air conditioning
To switch on the air conditioning the on/off switch (1) must
be operated. This is indicated by a green lamp on the on/off
switch (1).
The cooling effect is adjusted by turning the cooling control
(4) clockwise.
Switch on the air conditioning several
times a year -- even in colder seasons --
so the moving parts in the system are
lubricated.
Starting the heating
Turning the right-hand switch (2) clockwise opens the
heating valve. The heating effect increases as you turn the
switch (2) clockwise.
BMII-190
4
3
1
2
To achieve effective heating / cooling
performance inside the cabin, at least
fan stage 1 must be operated.
The possibilities to adjust the cooling /
heating control can also be combined,
i.e. despite maximum cooling, the
heating control can be operated to set
the room temperature desired.
To Next Page
Loading...
