Krone Big M II - Ignition Switch Operation; Horn Operation; Multifunction Handle Switches

III - 12
Controls
3.17 Horn
Horn sounds when the button is pressed.
3.16 Ignition Switch
The ignition switch has 4 positions:
0-Off
I - Electrical circuit for electronics is switched on
II - The ignition is switched on
III - Start position
BMII-177
1
BMII-204
3.18 Switches on Multifunction
Handle
The switches 1 - 8 operate the mowers. The mowers can
raised or lowered together or individually. The switches only
work when the mowers are in mowing position or standby
position.
Switch (1) All mowers off
Switch (2) Shift front mower to the right (option)
Switch (3) Shift front mower to the left (option)
Switch (4) Lift/lower right mower
Switch (5) Lift/lower left mower
Switch (6) Lift front mower
Switch (7) Lower front mower
Switch (8) Lift/lower all mowers
When the function "lift all" is activated, the mower units lift
right and left after a delay of approx. 3 seconds.
The "Lift all" function is designed for the
full engine speed. If the engine speed is
slower, the front cutter bar will not lift
completely.
BMII-195
4
2
3
5
6
1
7
8
END
END
GO
GO
GO
GO
END
END
-
+
-
+
N