IX - 2
Driving and Transport
Move the mowers to transport position.
The road safety switch must be in road
position (II) when you drive on the road.
This ensures that all hydraulic functions -
apart from steering and brakes - are
deactivated.
BMII-025
9.5 Disengaging Parking Brake
9.6 Road Safety Switch
9.4.1 Foot Brake (Road Driving)
For road safety reasons, the brake
pedals must always be coupled by
moving the locking lever.
No individual wheel brake available.
Before the start of every trip check the
brake function.
9.4 Brakes
By operating the foot brake the hydrostat decelerates
automatically.
The brake function must be checked
before the start of every trip.
During road driving the engine speed is
automotively controlled by the driving
computer.
To disengage the parking brake, the parking brake
switch must be set to position II.
To Next Page
Loading...
