X - 8
Mowers
10.2.9 Setting the Swath Width
The swath width is adjusted using the swath board on the
rear of the disc mowers.
Side mowers
Setting the swath width wide.
Loosen ring nut (1).
Set swath width.
Tighten the ring nut (1) again.
Front mower
Adjust the swath width so that the track of the mower still
remains free.
Loosen ring nut (1).
Set swath width.
Tighten the ring nut (1) again.
BM30012
1
1
Setting the Roller Pressure
Loosen the lock nut (1) (spanner size 41).
Turn the spindle on the screw head (2) (spanner size
55).
Turn clockwise = greater application force
Turn anticlockwise = lower application force
Tighten the lock nut (1) again.
Readjust the roller spacing after each adjustment.
BM30030