Krone Big M II - KMC 1 Fuses and LEDs

XII - 5
Maintenance - Electrical System
12.12 Fuses and LED on Krone-Machine-Controller (KMC 1)
Big M II KMC 1
LD1
LD2
LD3
LD4
LD5
LD6
LD7
LD8
LD9
LD10
LD11
LD12
LD13
LD14
LD15
LD16
LD17
LD18
LD19
LD20
LD21
LD22
LD23
LD24
LD25
LD26
LD30
LD31
LD32
LD33
LD34
LD35
LD36
LD27
LD28
LD29
F2
F6
F7
LD38
F12 F13
LED Function LED Function Fuses Value Function
LD1 Lower mower front LD19 Air filter soiling F2 10 A Voltage supply (UV4)
LD2 Safety exit LD20 Free F6 25 A Voltage supply (UV2)
LD3 Main valve LD21 Position mower right F7 30 A Earth (GND)
LD4 Lower mower right LD22 Position mower left F12 10 A Voltage supply (UV3)
LD5 Lift mower right LD23 Free F13 25 A Voltage supply (UV1)
LD6 Push off left mower LD24 Axle suspension position
LD7 Levelling system right LD25 Auger speed right
LD8 Levelling system left LD26 Auger speed left
LD9 Lift mower front LD27 +8V digital
LD10 Fan reversal LD28 +8V analog
LD11 Lift mower left LD29 +5V supply
LD12 Lower mower left LD30 Drive mower left
LD13 Rotation speed mower rh LD31 Free
LD14 Hydraulic tank level LD32 Free
LD15 Free LD33 Push off right mower
LD16 Rotation speed mower lh LD34 Drive mowe right
LD17 Filter pressure monitoring LD35 Drive mower front
LD18
Rotation speed mower
front
LD36 Control input