Chapter 1 Before You Install the InTouch
16
• Slim Profile model — Choose from the following power supply methods:
– Power-over-Ethernet (PoE) or PoE Plus cable
– Mounted near an AC outlet, with wall transformer plugged in
Adherence to local codes
Installation of the InTouch, including all electrical wiring, must comply with all
applicable national, federal, state, and local safety codes and standards.
Ethernet cables
• Location — Plan to install the InTouch in a location that allows an easy and
secure connection to an external network (for example, using the Ethernet
cable).
• Ethernet requirements and specifications:
– If you are using Power-over-Ethernet (PoE), your network must comply
with the 802.
3a
f standard; if you are using PoE Plus, your network must
comply with
the 802.3at standard.
– Th
e InTouch supports 10BASE-T or 100BASE-T Ethernet
communication and autosensing between 10Mbit and 100Mbit.
– Ethernet communication requires an RJ-45, 8-wire connection, and must
meet all other wiring code specifications.
• All cables must be in place before installing the InTouch.
To Next Page
Loading...