Chapter 1 Before You Install the InTouch
20
Configuration settings
After you power up the InTouch, a network administrator or similarly qualified
individual must configure the settings for that device. Those settings must match
the information that the administrator entered on the server using the host
application.
The host application system administrator guide, InTouch 9100 User Guide, and
the release notes have all the necessary information. InTouch and Workforce
Central documentation can be found by logging in online at
http://community.kronos.com.
Next step
Depending on the InTouch model purchased for your site, go to one of the
following chapters to install that device:
• Chapter 2, “Install the Standard Model InTouch,” on page 21
• Chapter 3, “Install the Slim Profile InTouch,” on page 61
To Next Page
Loading...