Next steps
59
Next steps
To configure the InTouch for your site, the network administrator or similarly
qualified individual configures device settings on the host server and on the
installed unit. The following documents provide that information:
• The host application system administrator guide.
• The InTouch 9100 User Guide. See the section about initial setup.
InTouch and Workforce Central documentation can be found by logging in online
at http://community.kronos.com.
Note: If the InTouch is replacing a Series 4000, also see the configuration
guidelines in “Step 3: Install and configure the InTouch” on page 122.
To Next Page
Loading...