Appendix B Open and Disconnect the InTouch
126
Step 3: Disconnect the power
Standard model
• If your unit is mounted over a wall outlet, unplug the transformer power cord
from that outlet. For example:
• If your unit uses Power-over-Ethernet (PoE) or PoE Plus, unplug the Ethernet
cable from the main board. To remove the Ethernet cable, see “Example 2:
Ethernet cable” on page 129.
• If your unit is plugged into a nearby external wall outlet, unplug the
transformer from that outlet.
Slim Profile model
Unplug the Ethernet cable (if that is the source of power for the device) or unplug
the power cable that is connected to the wall outlet away from the device.
To remove the Ethernet cable, see “Example 2: Ethernet cable” on page 129.
To Next Page
Loading...