Kubota 07-CR-E5 - Page 119

COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S81
9Y3200007CRS0119US0
Name Injector charge voltage: High
ISO 14229
P-Code
P0200
J1939-73
SPN 523535
FMI 0
SPN Name
SAE J1939 Table C1
proprietary
DTC Name Injector charge voltage: High
Detection item • Injector charge voltage: High
DTC Set
Preconditions
• Battery voltage is normal
• CPU is normal
DTC set parameter • Injector charge voltage: High
Time to action or
number of error
detection
• 10 sec. or more
Limp Home Action
by engine ECU
(system action)
• Output limitation: Approximately 75 % of normal condition
•EGR stop
• Intake throttle 100 % open
• Engine forcibly stopped 60 sec. later
Behaviour During
Malfunction
• Insufficient output
• Worsening exhaust gas performance
• Engine stops
Engine Warning
Light
•ON
Recovery from
error
• Key switch turn OFF
Delay time for
recovery
–
Remark
KiSC issued 03, 2022 A