EasyManua.ls Logo

Kubota 07-CR-E5 - Emission Deterioration (DTC P3001; 3252-0)

Kubota 07-CR-E5
373 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S289
(54) Emission Deterioration (DTC P3001 / 3252-0)
Behaviour during malfunction:
Insufficient output
Detection item:
DOC is heated up due to unburned fuel
DTC set preconditions:
Other than during regeneration mode
Coolant temperature is 50 °C (122 °F) or more: continues longer than 5 min. after engine starting
DTC set parameter:
•T
1
T
0
250 °C (482 °F)
Engine warning light:
•ON
Limp home action by engine ECU (system action):
Output limitation: Approximately 50 % of normal condition
Speed limitation (Accelerator limitation: 50 %)
EGR stop
Intake throttle 100 % open
Recovery from error:
Key switch turn OFF
9Y3200007CRS0445US0
1. Check the Air Intake System
1. Check in accordance with "6.[1] AIR INTAKE SYSTEM
INSPECTION PROCEDURE". (Refer to page 1-S320)
NOTE
Check the clogging condition of the air cleaner. If it is very
dirty, replace the new one.
Check if the suction hose of the turbocharger blower does
not come off. If the hose comes off, install it.
Check the suction path for leaks. (Suction path joints,
suction pipes, hoses)
Check the installation of all exhaust gas temperature
sensors (T
0
, T
1
and T
2
).
Check the engine oil level.
Check the engine coolant level.
Check whether turbocharger has abnormality. (sound and
externals)
9Y3200007CRS0446US0
OK Go to "2. Check the DTC".
NG Repair in accordance with "6.[1] AIR INTAKE SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S320)
(1) Hose Clamp
(2) Hose
(3) Turbocharger
KiSC issued 03, 2022 A

Table of Contents

Related product manuals