EasyManua.ls Logo

Kubota 07-CR-E5 - Pump Seizing (DTC P1274; 523539-2, P1275; 523540-2)

Kubota 07-CR-E5
373 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S234
(35) Pump Seizing (DTC P1274 / 523539-2, P1275 / 523540-2)
P1274 / 523539-2: Pump seizing 1
Behaviour during malfunction:
Insufficient output
Worsening exhaust gas performance
Detection item:
High pressure 1 error
DTC set preconditions:
Sensor supply voltage VCC# is normal
Rail pressure sensor is normal
DTC set parameter (Approximate parameter):
Rail pressure of 230 MPa (2350 kgf/cm
2
, 33400 psi) or more continues 1 second under the condition of above
800 min
-1
(rpm)
Rail pressure of 220 MPa (2250 kgf/cm
2
, 31900 psi) or more continues 1 second under the condition of below 800
min
-1
(rpm) [Threshold changes depending on the engine speed. 700 min
-1
(rpm) should be used as a reference]
Engine warning light:
•ON
Limp home action by engine ECU (system action):
Output limitation: Approximately 50 % of normal condition
Speed limitation (Accelerator limitation: 50 %)
•EGR stop
Intake throttle 100 % open
Recovery from error:
Key switch turn OFF
9Y3200007CRS0359US0
P1275 / 523540-2: Pump seizing 2
Behaviour during malfunction:
Insufficient output
Worsening exhaust gas performance
Detection item:
High pressure 2 error
DTC set preconditions:
Sensor supply voltage VCC# is normal
Rail pressure sensor is normal
DTC set parameter (Approximate parameter):
Rail pressure of above 197 MPa (2010 kgf/cm
2
, 28600 psi), and below 230 MPa (2350 kgf/cm
2
, 33400 psi)
continues total time for 35 seconds under condition of above 800 min
-1
(rpm) [Threshold changes depending on
the engine speed. 2000 min
-1
(rpm) should be used as a reference]
Or, rail pressure of above 220 MPa (2250 kgf/cm
2
, 31900 psi) continues total time for 1.7 sec. under condition of
below 800 min
-1
(rpm) [Threshold changes depending on the engine speed. 700 min
-1
(rpm) should be used as a
reference]
Engine warning light:
•ON
Limp home action by engine ECU (system action):
Output limitation: Approximately 50 % of normal condition
Speed limitation (Accelerator limitation: 50 %)
•EGR stop
Intake throttle 100 % open
Recovery from error:
Key switch turn OFF
9Y3200007CRS0360US0
KiSC issued 03, 2022 A

Table of Contents

Related product manuals