Kubota 07-CR-E5 - Page 128

COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S90
9Y3200007CRS0128US0
Name Oil pressure error
ISO 14229
P-Code
P0524
J1939-73
SPN 100
FMI 1
SPN Name
SAE J1939 Table C1
Engine Oil Pressure
DTC Name Oil pressure error
Detection item • Oil pressure switch
DTC Set
Preconditions
• Battery voltage is normal
• Key switch turn ON
• Starter Switch signal (Engine ECU: V12 terminal) is not activated
• 10 sec. or more after engine start [700 min
-1
(rpm) or higher]
DTC set parameter • Oil pressure switch ON: continues 1 sec. or more
Time to action or
number of error
detection
•Transient
Limp Home Action
by engine ECU
(system action)
•None
Behaviour During
Malfunction
• Engine stops
Engine Warning
Light
•ON
Recovery from
error
• Key switch turn OFF
Delay time for
recovery
–
Remark
KiSC issued 03, 2022 A