COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S103
9Y3200007CRS0141US0
Name EEPROM check sum error Removal of DPF (PCD)
ISO 14229
P-Code
P1990 P1A28
J1939-73
SPN 523700 3936
FMI 13 7
SPN Name
SAE J1939 Table
C1
proprietary Aftertreatment Diesel Particulate Filter
System
DTC Name EEPROM check sum error Removal of DPF (PCD)
Detection item • KBT-EEPROM check sum error • Removal of DPF
DTC Set
Preconditions
• Battery voltage is normal • Refer to P3018 and P2455
DTC set parameter
• EEPROM check sum error • Exhaust gas temperature sensor T0, T1,
T2 and differential pressure sensor are
fault (open circuit)
Time to action or
number of error
detection
• Transient • Transient
Limp Home Action
by engine ECU
(system action)
•None •No Derating
Behaviour During
Malfunction
• None • None
Engine Warning
Light
• ON • ON (Blinking)
Recovery from
error
• Key switch turn OFF –
Delay time for
recovery
––
Remark •PCD
To Next Page
Loading...
