Kubota 07-CR-E5 - Page 244

COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S206
1. DTC Judgment
1. Place the key switch in the OFF position, and attach the
diagnosis tool to the CAN1 connector.
2. Place the key switch in the ON position, check whether the DTC
is output or not.
3. Check the DTC again after starting up the engine with the
coolant temperature over 50 °C (122 °F).
9Y3200007CRS0298US0
Service
specification
DTC must not be output.
OK Normal.
NG Replace the EGR assembly.
(a) CAN1 Connector
KiSC issued 03, 2022 A