11 / 123Issued: 13.08.2012 Version: KST PLC mxAutomation Logix 1.0 V1 en (PDF)
3 Safety
3 Safety
This documentation contains safety instructions which refer specifically to the
software described here.
The fundamental safety information for the industrial robot can be found in the
“Safety” chapter of the Operating and Programming Instructions for System In-
tegrators or the Operating and Programming Instructions for End Users.
The “Safety” chapter in the operating and programming instructions
must be observed. Death to persons, severe injuries or considerable
damage to property may otherwise result.
To Next Page
Loading...