14 / 123 Issued: 13.08.2012 Version: KST PLC mxAutomation Logix 1.0 V1 en (PDF)
KUKA.PLC mxAutomation Logix 1.0
LOG file A LOG file is created under C:\KRC\ROBOTER\LOG.
4.3 Uninstalling KUKA.PLC mxAutomation Logix
Precondition “Expert” user group
Procedure 1. In the main menu, select Start-up > Install additional software. All addi-
tional programs installed are displayed.
2. Mark the entry mxAutomation Logix and click on Uninstall. Reply to the
request for confirmation with Yes. Uninstallation is prepared.
3. Reboot the robot controller. Uninstallation is resumed and completed.
LOG file A LOG file is created under C:\KRC\ROBOTER\LOG.
It is advisable to archive all relevant data before uninstalling a soft-
ware package.
To Next Page
Loading...