6-14
Using Various Functions > Functions
Zoom
Adjust the zoom to reduce or enlarge the image.
Combine
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
Item Description
100% Reproduces the original size.
Auto Reduces or enlarges original to printing size.
• To reduce or enlarge the image, select the paper size.
Paper Selection
(page 6-5)
• Some combinations of original size and paper size may cause the image to be positioned at the edge of the paper.
To center the original vertically and horizontally on the page, use the Centering function.
Margin/Centering, Margin
(page 6-16)
Item Value Description
Off
2 in 1 Layout L to R/T to B, R to L/B to T Select the direction the pages should
flow.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the boundary line type.
Select [Border Line] to select the page
boundary line, and select [OK].
None Dotted LineSolid Line Positioning Mark