Kyocera ECOSYS P8060cdn - Optional Network

8-42
Setup and Registration (System Menu) > System Menu
Ping
[System Menu/Counter] key > [System/Network] > [Network] > [Ping]
Restart Network
[System Menu/Counter] key > [System/Network] > [Network] > [Restart Network]
Optional Network
[System Menu/Counter] key > [System/Network] > [Optional Network]
Basic
Configure settings for the optional Network Interface Kit.
Item Description
Ping Checks if communication with the destination by entering the host name or IP
address of the destination is possible.
NOTE
If [Primary Network (Client)] is set to [Others], this item is not displayed.
Item Description
Restart Network Restarts the network.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
Host Name Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-54)
TCP/IP Setting For details on setting value.
TCP/IP Setting (page 8-36)
Bonjour (page 8-38)
IPSec (page 8-38)
NetWare Use NetWare to receive documents.
See the Operation Guide for the optional network interface card for details.
Value: Off, On
AppleTalk Selects whether to receive documents using AppleTalk.
*1
Value: Off, On
LAN Interface Select the LAN Interface type.
*1
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full,
1000BASE-T
NOTE
This function is displayed when the optional Network Interface Kit is installed.