8-3
Setup and Registration (System Menu) > System Menu
System Menu Settings
This section explains the functions that can be configured in System Menu. To configure the settings, select the item in
System Menu and select the setting item. For details on each function, see the table below.
Item Description
Reference
Page
Quick Setup Wizard The Quick Setup Wizard configures Network and Energy Saver
settings.
page 2-37
Counter Check the number of sheets printed. page 2-48
Cassette/MP Tray Settings Select paper size and media type for Cassettes and multipurpose
tray.
page 8-6
Cassette 1 (to 5) Select type of paper in Cassette 1 (to 5). page 8-6
MP Tray Setting Select type of paper in multipurpose tray. page 8-7
Common Settings Configure overall machine operation. page 8-9
Language Set the language to use for the touch panel display. page 8-9
Default Screen Select the screen appearing right after start-up (default screen). page 8-9
Buzzer Set options for buzzer sound during the machine operations. page 8-9
Keyboard Layout Change the layout of the touch panel keyboard used to enter
characters.
page 8-10
Paper Settings Configure settings for paper. page 8-10
Measurement Select inch or metric for the unit for paper dimensions. page 8-13
Error Handling Select whether to cancel or continue the job when error has
occurred.
page 8-13
Paper Output Select the output tray respectively for print jobs from Document
Box and computers.
page 8-15
Function Key Assignment Assign a function to each function key. page 8-15
Color Toner Empty Action Select whether printing is prohibited or the Print in Black and
White setting is used for printing once the color toner runs out.
page 8-16
Function Defaults Defaults are the values automatically set after the warm-up is
completed or the [Reset] key is selected.
Set the defaults for available settings. Setting the frequently-used
values as defaults makes subsequent jobs easier.
page 8-16
Optional Keyboard Type Select the type of optional keyboard that you want to use. page 8-17
System Stamp Configure settings for header, footer, and stamp. page 8-17
Manual Staple Select whether to use Manual Staple. page 8-19
Offset Documents by Job Select whether to offset documents by Job. page 8-19
Low Toner Alert Level Set the amount of remaining toner to notify the administrator when
to order a toner when the toner is running low.
page 8-20
Toner Waste Full Alert Set the capacity of the waste toner box for which you require
notification to be sent that the waste toner box is going to be full.
page 8-20
To Next Page
Loading...
Need help?
General
Weight and Dimensions
