10-34
Troubleshooting > Adjustment/Maintenance
Adjustment/Maintenance
Overview of Adjustment/Maintenance
If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can carry out.
Color Registration Procedure
When first installing the machine or moving it to a new location, color drift during printing may occur. Use this function to
correct the color position of each of cyan, magenta and yellow to resolve color drift.
Normal registration and detailed registration are available for Color Registration. Color drift can be largely corrected
through normal registration. However, if it is not resolved or to perform more detailed settings, use the detailed
registration.
Normal Registration
1
Load paper.
Load A4/Letter paper in the cassette.
Item Description Reference Page
Color Registration
Procedure
Correct the color position to resolve color drift. page 10-34
Drum Refresh Remove image blur and white dots from the printout. page 10-38
Calibration Calibrate the device to ensure correct toner overlapping and
consistency with the original tone.
page 10-38
Laser Scanner Cleaning Remove vertical white lines from the printout. page 10-38
Developer Refresh Adjust the printed image that is too light or incomplete, even though
there is enough toner.
page 10-39
Before performing color registration, be sure to perform Calibration. If color drift remains, perform color
registration. By performing color registration without performing Calibration, the color drift will be resolved
once, however, it may cause the serious color drift later.
Calibration on page 10-38
To Next Page
Loading...
Need help?
General
Weight and Dimensions
