Kyocera ECOSYS P8060cdn - Quick Setup Wizard

2-37
Installing and Setting up the Machine > Quick Setup Wizard
Quick Setup Wizard
For Energy Saver functions and network settings, the following settings can be configured in a wizard-style screen.
1
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
2
Select a function.
Energy Saver Setup Configures sleep mode and low power mode.
1. Sleep Mode For Europe
Sleep Timer
Sleep Rules
Except for Europe
Sleep Timer
Sleep Level
2. Low Power Mode Low Power Timer
3.Recovery Mode Energy Saver Recovery Level
4.Weekly Timer Settings Weekly Timer
Schedule
*1
Retry Times
*1
Retry Interval
*1
*1 This function is displayed when [Weekly Timer] is set to [On].
Network Setup Configures network settings.
1. Network Network Selection
*2
Wi-Fi
*3
DHCP
*4
IP Address
*5
Subnet Mask
*5
Default Gateway
*5
*2 This function is displayed when the Wireless Network Interface Kit (IB-35) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
IB-35 "Wireless Network Interface Kit"
(page 11-5)
*3 This function is displayed when [Network Selection] is set to [Wi-Fi].
*4 This function is displayed when [Network Selection] is set to [Wired Network].
*5 This function is displayed when [DHCP] is set to [Off].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000