7-11
Status/Job Cancel > Device/Communication
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
1 Select the [Status/Job Cancel] key.
2 Select [Device/Communicate].
The screen to check the status or configure the devices is displayed.
2
Check the status.
The items you can check are described below.
"Printer"
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or
printing are displayed.
"Removable Memory (USB Memory)"
• The usage, capacity and free space of the external media connected to this machine are
displayed.
•Select [Format] to format external media.
•Select [Remove] to safely remove the external media.
"Hard Disk"
The information such as formatting, overwriting for erasure, and error occurrence is displayed.
"Connectivity"
The network connection status and the status of the optional keyboard are displayed.
When [Format] is selected, all data in the external media is erased.
To Next Page
Loading...
