9-17
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "ID Card Settings" [Next]
2
Configure the settings.
The following settings can be selected.
This functions appears when the Card Authentication Kit is activated.
Optional Applications (page 11-7)
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000
Item Descriptions
Keyboard Login When ID card authentication is enabled, select whether or not
login by keyboard is allowed.
Value: Permit, Prohibit
Additional
Authentication
*1
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in
"Network Authentication".
Select whether or not to require password entry after
authenticating by ID card.
Value: Off, Use Password, Use PIN
To Next Page
Loading...
