6-16
Using Various Functions > Functions
Margin/Centering, Margin
Add margins (white space). In addition, you can set the margin width and the back page margin.
Centering: Centers the original image on the paper when printing onto paper different from the original size.
The default setting for margin width can be changed.
Margin Default (page 8-16)
Item Value Description
Off
Margin Left/Right Metric: -18 mm to +18 mm
(in 1 mm increments)
Inch: -0.75" to +0.75"
(in 0.01" increments)
Set the margin width.
*1
Select [+] or [-] to enter the margins for "Left/
Right" and "Top/Bottom". Select [#Keys] to
use the numeric keys for entry.
*1 The input units can be changed in System Menu.
Measurement
(page 8-13)
Top/Bottom
Back Page Auto, Manual For duplex printing, select [Back Page] and
select [Auto] or [Manual].
When [Auto] is selected, an appropriate
margin is applied automatically on the rear
page depending on a margin specified for the
front page and a binding orientation.
When [Manual] is set, you can set a different
margin than the front on the back. Set the
margin in the screen that is displayed. The
setting selections are the same as for the
front.
Centering
*2
*2 Not displayed when printing from removable memory.
Centers the original image on the paper.
Functions
To Next Page
Loading...
