Kyocera ECOSYS P8060cdn - Connecting the Machine and Other Devices

2-6
Installing and Setting up the Machine > Connecting the Machine and Other Devices
Connecting the Machine and Other Devices
Prepare the cables necessary to suit the environment and purpose of the machine use.
When Connecting the Machine to the PC via USB
When Connecting the Machine to the PC on the Network
Cables that Can Be Used
NOTE
If you are using the machine with the optional wireless interface kit attached, you do not need to connect the LAN
cable. To use a wireless LAN, it is necessary to change the default settings for the machine using the System Menu.
Optional Network (page 8-42)
Connection Environment Function Necessary Cable
Connect a LAN cable to the
machine.
Printer LAN cable (10BASE-T, 100BASE-TX,
1000BASE-T)
Connect a USB cable to the
machine.
Printer USB2.0 compatible cable (Hi-Speed USB
compliant, Max. 5.0 m)
IMPORTANT
Using a cable other than a USB 2.0 compatible cable may cause failure.
USB
Network
Network cable
connection
Wi-Fi connection
*1
Wi-Fi Direct
connection
*1
Wi-Fi access point
Tablet
*1 Only for models with Wi-Fi.