Kyocera ECOSYS P8060cdn - Simple Login Settings

9-15
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
Enabling Simple Login
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Simple Login Settings" [Next] > "Simple Login" [Change]
2
[On] or [Off] > [OK]
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Simple Login Settings" [Next] > "Simple Login Key" [Next]
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Select [Add/Edit].
NOTE
• The authentication for this machine uses a network authentication server. The registration of users is done on the
server.
• To use Simple Login, User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration
(page 9-3)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000