Kyocera FS-C8520MFP - Checking;Setting the Fuser Count; Confirmation;Setting the Fuser Drive Time

2MY/2MZ
1-3-62
U161 Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U167
Checking/setting the fuser count
Description
Displays and sets the fuser count for checking.
Purpose
To check or set the fuser count after replacement of the fuser unit.
Method
1. Press the start key. The fuser count is displayed.
Setting:[Cnt]
1. Press [Cnt].
2. Change the setting using the cursor left/right keys or numeric keys.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U168
Confirmation/setting the fuser drive time
Description
Displays and settings the specification of fuser drive time for checking.
Purpose
To check or set the drive time of fuser unit after replacement of the fuser unit.
Method
1. Press the start key. The drive time of fuser unit is displayed.
Setting
1. Select the item to be set.
2. Change the setting using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Cnt Fuser count value
Display Description
Press
Counts of the fuser drive time ( Pressing force)
Release
Counts of the fuser drive time ( Decompression)