2MY/2MZ
1-3-86
U429
Setting the offset for the color balance
Description
Displays and changes the density for each color during copying in the various image quality
modes.
Purpose
To change the balance for each color.
Method
1. Press the start key.
2. Select the image quality mode. The setting screen for the selected item is displayed.
Setting
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Increasing the value darkens the density and decreasing it lightens the density.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Text + Photo Density of each color in the text & photo mode
Photo Density of each color in the photo mode
Text Density of each color in the text mode
Graphics/Map Density of each color in the graphics/map mode
Copy/Print out Density of each color in the printed document mode
Display Description Setting
range
Initial set-
ting
C Value of the cyan setting -5 to 5 0
M Value of the magenta setting -5 to 5 0
Y Value of the yellow setting -5 to 5 0
K Value of the black setting -5 to 5 0
To Next Page
Loading...
