Kyocera FS-C8520MFP - Confirmation;Setting the Fuser Power Supply; Displaying Fuser Heater Temperature

2MY/2MZ
1-3-63
U169
Confirmation/setting the fuser power supply
Description
Displays and settings the specification of fuser power supply for checking.
Purpose
To check or set the specification of fuser power supply after replacement of the fuser power sup-
ply.
Method
1. Press the start key. The specification of fuser power supply is displayed.
Setting
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U199
Displaying fuser heater temperature
Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the start key. The current setting is displayed.
Completion
Press the stop key. The screen for selecting a maintenance mode No. is displayed.
Item No. Description
Display Description
Mode Specification of fuser power supply
(1: 100V , 2: 200V , 3: 120V )
Display Description
Fix Press
Press roller center temperature (°C)
Fix Edge
Heat roller edge temperature (°C)
Fix Center
Heat roller center temperature (°C)