2MY/2MZ
1-3-88
U464
Setting the ID correction operation
Description
Turns ID correction (calibration) on or off. Also, this determines the duration of calibration and the
timing of calibration during printing. Also, this allows individual settings for calibration operation by
enabling custom settings.
Purpose
To restrict calibration when poor image quality is generated. Also, this allows individual settings
for calibration by enabling custom settings in setting the calibration cycle under the machine
defaults depending on the user preferences.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Setting: [Permission]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Setting: [Time Interval]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Item No. Description
Display Description
Permission Setting of operation permission
Time Interval Setting of driving time
Bias Target Setting of Bias target
Gamma Target Setting of quantities of light target
Calib Execution of calibration
Display Description Setting
range
Initial set-
ting
Calib Setting the permission of calibration. On/Off On
Paper Int Calib Setting the permission of calibration
between paper.
On/Off On
Display Description Setting Initial set-
Paper Int Calib Setting the driving time of the calibra-
tion between paper.
0 to 100 10
Sleep Out Setting the execution time of sleeve
return calibration.
0 to 100 20
T/C Calib Setting the execution time of T/C cali-
bration.
0 to 100 10
To Next Page
Loading...
