2MY/2MZ
1-3-104
U615 Setting system 6
Description
Makes settings for fax reception regarding the sizes of the fax paper and received images.
Purpose
To set the maximum recording width and processing method when 11" width fax paper is loaded
on an inch specification machine.
Setting
1. Press the start key.
2. Select [RX Width For 11"].
3. Select the setting.
* : Initial setting: Ledger
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U620 Setting the remote switching mode
Description
Sets the signal detection method for remote switching. Be sure to change the setting according to
the type of telephone connected to the machine.
Setting
1. Press the start key.
2. Select [Remort Mode].
3. Select the mode.
* : Initial setting: One
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Ledger Communicates to the destination unit 11" width as A3 width
and records at 100% magnifications.
B4 Communicates to the destination unit 11" width as B4 width.
Display Description
One One-shot detection
Cont Continuous detection
To Next Page
Loading...
