2MY/2MZ
1-3-69
U250 Checking/clearing the maintenance cycle
Description
Changes preset values for maintenance cycle and automatic grayscale adjustment.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance and
automatic grayscale adjustment is periodically displayed.
Setting
1. Press the start key.
2. Select the item to be changed.
3. Change the setting using the cursor left/right keys or numeric keys.
4. Press the start key. The setting value is set.
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting range Initial
setting
M.Cnt A Preset values for maintenance cycle (A) 0 to 9999999 200000
M.Cnt B Preset values for maintenance cycle (B) 0 to 9999999 200000
M.Cnt HT Preset values for automatic grayscale
adjustment
0 to 9999999 0
To Next Page
Loading...
