Kyocera FS-C8520MFP - Developing Section

2MY/2MZ
2-1-7
2-1-3 Developing section
The developing unit consists of the sleeve roller that forms the magnetic brush, the magnet roller, the devel-
oping blade and the developing screws that agitate the toner.Also, the toner sensor (TS) checks whether or
not toner remains in the developing unit.
Figure 2-1-9 Developing section
1
3
4
7
5
2
6
8
1. Sleeve roller
2. Magnet roller
3. Developing screw A
4. Developing screw B
5. Developing blade
6. Developer case
7. Developer base
8. Toner sennsor (TS)