Kyocera FS-C8520MFP User Manual

2MY/2MZ
2-2-5
14. Paper sensor 2 (PS2) ........................... Detects the presence of paper in the cassette.
15. Lift sensor (LS)...................................... Detects activation of upper limit of the bottom plate.
16. Paper size width switch (PWSW).......... Detects the width of paper in the cassette.
17. Paper size length switch (PLSW) ......... Detects the length of paper in the cassette.
18. ID shutter sensor (IDSS)....................... Detects the position of the iD shutter.
19. ID sensor 1 (IDS1) ................................ Measurement of density of toner at calibration.
20. ID sensor 2 (IDS2) ................................ Measurement of density of toner at calibration.
21. Main power switch (MSW) .................... Turns ON/OFF the AC power source.
22. Bridge detection switch (BRDSW) ........ Detects the presence the bridge.
23. Job eject papersensor (JEPS) .............. Detects the presence of paper in the job separator.
24. Temperature sensor (TEMS)................. Detects temperature and absolute humidity in machine.
25. Toner sensor Y (TS-Y) .......................... Detects the amount of toner remainder in the developing unit Y.
26. Toner sensor C (TS-C).......................... Detects the amount of toner remainder in the developing unit C.
27. Toner sensor M (TS-M) ......................... Detects the amount of toner remainder in the developing unit M.
28. Toner sensor K (TS-K) .......................... Detects the amount of toner remainder in the developing unit K.
29. Fuser thermistor 1 (FTH1) .................... Detects the heat roller temperature.(edge)
30. Fuser thermistor 2 (FTH2) .................... Detects the heat roller temperature.(center)
31. Fuser thermistor 3 (FTH3) .................... Detects the press roller temperature.
32. TC belt sensor 1 (TCBS1)..................... Detects the position of the primary transfer belt.
33. TC belt sensor 2 (TCBS2)..................... Detects the position of the primary transfer belt.
34. DP original size width sensor
(DPOWS) .............................................. Detects the width of the original.
35. DP original sensor (DPOS) ................... Detects the presence of an original.
36. DP original size length sensor
(DPOLS) ............................................... Detects the length of the original.
37. DP paper feed sensor (DPPFS)............ Detects a paper misfeed.
38. DP registration sensor (DPRS) ............. Controls the secondary paper feed start timing.
39. DP timing sensor (DPTS)...................... Detects the original scanning timing.
40. DP open/close sensor (DPOCS)........... Detects the opening/closing of the DP.
41. DP switchback sensor (DPSBS) ........... Detects the switchback guide in the home position.
42. DP interlock switch (DPILSW) .............. Shuts off 24 V DC power line when the dp top coveris opened.
43. Fuser pre sensor (FUPS)...................... Detects the JAM on this side of fuser.
44. Fuser roller rotation detection sensor
(FURDS) .................................................. Detects the rotation of the fuser roller.
45. Waste toner sensor (WTS).................... Detects when the waste toner box is full.

Kyocera FS-C8520MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	11 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A3)	10 ppm
Print speed (black, normal quality, A4/US Letter)	20 ppm
Duplex media weight	60 - 220 g/m²
Paper tray media types	Bond paper, Card stock, Coated paper, Envelopes, High resolution paper, Labels, Plain paper, Pre-Printed, Recycled paper, Rough paper, Thick paper
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Multi-purpose tray media types	Bond paper, Envelopes, Labels, Letterhead, Plain paper, Preprinted forms, Recycled paper, Thick paper, Transparencies
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	52 - 256 g/m²
Display	-
Product color	Grey, White
Market positioning	Business
AC input voltage	220 - 240 V
Power consumption (max)	557 W
Power consumption (ready)	121 W
Power consumption (standby)	0.9 W
Power consumption (average operating)	- W
Internal memory	1536 MB
Processor family	PowerPC
Card reader integrated	No
Maximum internal memory	2048 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	47 dB
Paper input type	Cassette, Paper tray
Total input capacity	100 sheets
Total output capacity	250 sheets
Maximum input capacity	1600 sheets
Total number of input trays	2
Maximum duty cycle	- pages per month
Page description languages	PCL 5c, PCL 6, PCL XL, PDF 1.4, PDF 1.5, PDF 1.6, PDF 1.7, PDF 1.7+, PostScript 3
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Fax compatibility	ITU-T G3
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copier resize	25 - 400 %
Maximum number of copies	999 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	11.7 s
Time to first copy (color, normal)	13.6 s
Copy speed (black, normal quality, A3)	10 cpm
Copy speed (black, normal quality, A4)	20 cpm
Copy speed (color, normal quality, A3)	8 cpm
Scan to	E-mail, FTP, SMB, TWAIN, USB, WIA
Scan drivers	TWAIN, WIA
Maximum scan area	A3 (297 x 420) mm
Scan speed (black)	40 inch/min
Image formats supported	JPEG XR, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 400 DPI
Faxing	Color faxing
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page

Weight and Dimensions

Width	590 mm
Height	740 mm