2MY/2MZ
1-3-50
U106 Setting:[OHP/Coated]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Method:[B/W]
1. Select the item. The screen for executing each item is displayed.
Method: [Light/Normal1 / Heavy1 / Heavy2-3]
1. Select the item. The screen for executing each item is displayed.
Setting:[1st side/2nd side]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Setting
range
Initial setting
20ppm 25ppm
Width<160 width of paper<160
0 to 200 40/59 40/59
160<=Width<220 160<= width of paper <220
0 to 200 33/42 33/42
220<=Width 220<= width of paper
0 to 200 25/31 25/31
Display Description
Light/Normal1
Weight of paper (light to usual 1)
Heavy1
Weight of paper (heavy 1)
Heavy2-3
Weight of paper (heavy 2 to 3)
Display Description
1st side
Correction value of single-side printing
2nd side
Correction value of duplex printing
Display Description
Setting
range
Initial setting
20ppm 25ppm
Width<160 width of paper<160
0 to 200 62/48/43
66/51/45
78/60/43
83/64/45
160<=Width<220 160<= width of paper <220
0 to 200 42/33/30
44/34/31
53/41/30
55/43/31
220<=Width 220<= width of paper
0 to 200 32/25/22
32/24/22
40/31/22
38/30/21