8
Using the Scan Functions
8-16
Address Input
With the Scan to E-mail or Scan to Internet FAX operation, you can
directly enter the e-mail address where the image data is to be sent.
For the input procedure, refer to “Setting the Destination” on page 8-45
(for Scan to E-mail) or “Setting the Destination” on page 8-70 (for Scan to
Internet FAX).
✎
Memo
If the transmission method is the same, the destination can specified
both by using one-touch keys or temporary registration keys and by
inputting the address.
8.3.3 Original Setting Screen
You can specify the type of document to be scanned.
Document Mode
Specify the document scan mode.
Settings: “1”, “2”, or “Book Copy”
✎
Memo
If “Book Copy” is selected, be sure to also specify the scan method.
If “Book Open” is selected, the document is scanned as one image. If
“Book Divide” is selected, the document is scanned as two images.
If “2” is selected, specify the position of the margin for duplex
documents.
Settings: “Left Binding” or “Top Binding”
To Next Page
Loading...
