Kyocera KM-4230

Using the Scan Functions
8
8-59
8.10.3 Setting the Storage Period of the Scanned Data
Using Printer Management Utility, you can set the period that scanned
data is stored on the hard disk.
Setup procedure
1 Start up Printer Management Utility.
2 Enter the administrator access code, and log in to Administrator mode.
3 On the “File” tab, click File Storage Life in the menu.
4 Specify settings for the following.
❍ File Storage Life: Specify the storage period of the files on the
hard disk.
Settings: “No File Time Limitation”, “1 day”, “2 days”, “3 days”, “4
days”, “5 days”, “6 days”, or “7 days”