8
Using the Scan Functions
8-60
8.10.4 Setting the Destination
Set the destination using one-touch keys or temporary registration keys.
Setup procedure
1 On this machine’s control panel, press the [Scan] key.
2 Touch [Address].
3 Select the desired index (index number or [Temp. Registration]) to
display a one-touch key list or temporary registration list.
4 Touch the one-touch key or temporary registration key to which the
destination is assigned.
❍ Only the settings whose transmission method was set to “File
(Scan To HDD)” during registration can be used.
✎
Memo
For the registration procedure of one-touch keys and temporary keys,
refer to “Registering Destinations in Advance” on page 8-25.
To Next Page
Loading...
