Using the Scan Functions
8
8-71
8.11.5 Error Notification
If an error occurs due to a mistake in the destination, an error notification
mail is sent to the Reply-To address or the sender’s address (From
address). If both the Reply-To address and the sender’s address are
specified, the reply-to address has priority. If either address is entered, the
entered address is valid.
The sender’s address (From address) and Reply-To address are set using
Printer Management Utility.
For the Sender’s address (From address), refer to “Basic Setup of the
Scan Functions” on page 8-11.
For the Reply-To address, refer to “Registering Destinations in Advance”
on page 8-25.
To Next Page
Loading...
